Does what it should!
Hotswappable gh60s with rgb are nothing crazy, but its not so easy to find one domestically in the EU. This pcb works as expected, is fairly priced and was shipped quickly and inexpensively.






Tax excluded. Shipping calculated at checkout
In stock · ships within one business day, delivery to United States in 7–12 business days

The MK60MX is a versatile 60% wired hot-swap PCB in the GH60 standard format, designed as a replacement or upgrade option for a broad range of common 60% cases. Instead of being manufacturer-specific, the MK60MX relies on the established GH60 hole pattern — fitting into numerous 60% builds. Fully QMK, VIA, and VIAL compatible, with per-key RGB, additional underglow LEDs, and all the important layout options. Designed by Quark.
The MK60MX supports both ISO and ANSI layouts on a single PCB — with extensive multi-layout options for the main areas:
The MK60MX offers two connection options: it features a built-in USB-C port in break-away design — the USB-C section can be detached if needed, in case your case requires a separate daughterboard solution. Alternatively, the MK60MX can be connected via a Unified Daughterboard. For this, a PicoMolex EZMate connector is used on the PCB — more precise, smaller, and more reliable than classic JST connectors.
The MK60MX is GH60 standard compatible and therefore automatically fits all cases that support the GH60 standard — including, among others, the KBDfans Tofu60 Redux, the Tofu60 Redux V2, and the Bakeneko60. Beyond that, it is compatible with many other 60% keyboards that support tray mount or O-ring mount. For these, compatibility should be checked individually. Thanks to its flexible connection (break-away USB-C or daughterboard), the MK60MX adapts to a wide variety of case designs.
The MK60MX features per-key RGB LEDs — each key individually configurable, from understated setups to reactive effects and animations. Additionally, underglow LEDs provide an atmospheric lighting effect beneath the board that especially shines in transparent or acrylic cases (such as the acrylic variant of the Tofu60 Redux V2).
The MK60MX uses a 1.6 mm non-flex-cut PCB — without flex cuts for a firmer, more stable, and more direct typing character with precise bottom-out. The ideal foundation for everyone who prefers a clearly defined, consistent typing feel.
The MK60MX runs on the proven QMK firmware (firmware source code will be released) and is both VIA and VIAL compatible. This lets you remap every single key, record macros, set up layers, and tailor the board exactly to your workflow — directly in the browser, without driver installation.
Does what it should!
Hotswappable gh60s with rgb are nothing crazy, but its not so easy to find one domestically in the EU. This pcb works as expected, is fairly priced and was shipped quickly and inexpensively.
Top Qualität, unpraktische LEDs
Die Verarbeitung des PC ist super und alle Hotswap Lötstellen und LEDs sind sauber verarbeitet. Auf der VIA Website war das PCB zum aktuellen Zeitpunkt noch nicht hinterlegt, aber auf Nachfrage bei MonacoKeys hab ich die JSON-Datei bekommen. Mit der kann ich über VIA manuell alle Tasten und LEDs einstellen. Beide Layouts ANSI und ISO sind voll unterstützt.
Da liegt aber auch der Nachteil: durch die beiden Layoutmöglichkeiten und damit vielen Switch Positionen mussten einige LEDs verschoben werden, nach oben oder zur Seite. Damit ist die Beleuchtung nicht uniform south-facing, d.h. je nach Position leuchten manche Tastenkappen stärker als andere und manche LEDs leuchten zwischen zwei Tastenkappen.
Nice pcb, very bright rgb. Supports many layouts. Unfortunately uses ezmate on pcb end which is more than a bit finicky as a connection type. For onboard USB this is a good substitute. If you need a daughterboard I would recommend something else.
The MK60MX is a versatile 60% wired hot-swap PCB in the GH60 standard format, designed as a replacement or upgrade option for a broad range of common 60% cases. Instead of being manufacturer-specific, the MK60MX relies on the established GH60 hole pattern — fitting into numerous 60% builds. Fully QMK, VIA, and VIAL compatible, with per-key RGB, additional underglow LEDs, and all the important layout options. Designed by Quark.
The MK60MX supports both ISO and ANSI layouts on a single PCB — with extensive multi-layout options for the main areas:
The MK60MX offers two connection options: it features a built-in USB-C port in break-away design — the USB-C section can be detached if needed, in case your case requires a separate daughterboard solution. Alternatively, the MK60MX can be connected via a Unified Daughterboard. For this, a PicoMolex EZMate connector is used on the PCB — more precise, smaller, and more reliable than classic JST connectors.
The MK60MX is GH60 standard compatible and therefore automatically fits all cases that support the GH60 standard — including, among others, the KBDfans Tofu60 Redux, the Tofu60 Redux V2, and the Bakeneko60. Beyond that, it is compatible with many other 60% keyboards that support tray mount or O-ring mount. For these, compatibility should be checked individually. Thanks to its flexible connection (break-away USB-C or daughterboard), the MK60MX adapts to a wide variety of case designs.
The MK60MX features per-key RGB LEDs — each key individually configurable, from understated setups to reactive effects and animations. Additionally, underglow LEDs provide an atmospheric lighting effect beneath the board that especially shines in transparent or acrylic cases (such as the acrylic variant of the Tofu60 Redux V2).
The MK60MX uses a 1.6 mm non-flex-cut PCB — without flex cuts for a firmer, more stable, and more direct typing character with precise bottom-out. The ideal foundation for everyone who prefers a clearly defined, consistent typing feel.
The MK60MX runs on the proven QMK firmware (firmware source code will be released) and is both VIA and VIAL compatible. This lets you remap every single key, record macros, set up layers, and tailor the board exactly to your workflow — directly in the browser, without driver installation.
Does what it should!
Hotswappable gh60s with rgb are nothing crazy, but its not so easy to find one domestically in the EU. This pcb works as expected, is fairly priced and was shipped quickly and inexpensively.
Top Qualität, unpraktische LEDs
Die Verarbeitung des PC ist super und alle Hotswap Lötstellen und LEDs sind sauber verarbeitet. Auf der VIA Website war das PCB zum aktuellen Zeitpunkt noch nicht hinterlegt, aber auf Nachfrage bei MonacoKeys hab ich die JSON-Datei bekommen. Mit der kann ich über VIA manuell alle Tasten und LEDs einstellen. Beide Layouts ANSI und ISO sind voll unterstützt.
Da liegt aber auch der Nachteil: durch die beiden Layoutmöglichkeiten und damit vielen Switch Positionen mussten einige LEDs verschoben werden, nach oben oder zur Seite. Damit ist die Beleuchtung nicht uniform south-facing, d.h. je nach Position leuchten manche Tastenkappen stärker als andere und manche LEDs leuchten zwischen zwei Tastenkappen.
Nice pcb, very bright rgb. Supports many layouts. Unfortunately uses ezmate on pcb end which is more than a bit finicky as a connection type. For onboard USB this is a good substitute. If you need a daughterboard I would recommend something else.